Security cabins with maximum security.
Our easily transported Armored Security Shacks are manufactured based both on international standards and specific demands of different countries.
Armored Security Shacks are used as Police and military security points, border patrol, customs, embassies and consulates, senior government buildings in areas where high security is needed such as holding centers with affordable price advantages.
ARMORED SECURITY SHACK SPECIFICATIONS
|PRODUCTION DIMENSIONS||Production based on requirement.|
|HEIGHT||2500mm max. Height (including parapet)|
|METAL PARTS||ST 37|
|CEMENT BOARD||TSE 634-2|
|GLASS WOOL||TS 901|
|POLYSTYRENE FOAM||TS 7316|
|EARTHQUAKE CONDITIONS||1st Degree Earthquake conditions.|
|CLIMATE CONDITIONS||Suitable for 3rd climate zone.|
|SNOW LOAD||200 Kg/m²|
|WIND SPEED||130 Km/Hour(must be fixed to the ground)|
|TRANSMISSION COEFFICIENT OF EXTERNAL WALL||K:0.50 Kcal/m2hc|
|ROOF TRANSMISSION COEFFICIENT||K:0.69 Kcal/m2hc|
|FLOOR HEAT TRANSFER COEFFICIENT||K:0.68 Kcal/m2hc|
|CHASSIS LOADING CAPACITY||200 Kg/m²|
|FLOOR COATING||2. mm thick PVC vinyl as main floor covering laid over 16 mm thick unflamable cement board.|
|System||Welded steel structure reinforced with specially shaped box profiles.|
Armour:First, steel structure is prepared with the strong steel profiles , then covered by armour steel. Protection Level is BR7.
Interior Coating; 8 mm cement board applied on steel armour. (PVC wainscot is used in Cabins with WC). Also different types of coating materials can be used such as waterproof fiberboard with aesthetic appearance.
Wall coating; 40 mm thickness, 10 kg/m³ Polystyrene foam (EPS) with fire class B1; full heat insulation, Rockwool or glasswool can be applied based on requirements.
Exterior coating;12 mm thick Wooden or Stone appereance coating cement boards can be apllied on steel armour.
|ROOF SYSTEM||Produced by special shaped construction and one piece carrier profiles and also single slop roof that prevents harmful objects from staying above it.|
|ROOF INSULATION||80 mm thickness glasswool (14 kg/m³)|
|INTERIOR CLADDING||PVC wainscot (8mm cement board can be used optionally ) (PVC wainscot is used in Cabins with WC)|
|EXTERIOR CLADDING||Armour Steel with BR7.level of protection.|
|EXTERIOR DOOR||Made of BR7 armour steel. An observation glass exists on the door and is made of 300x400 BR6. Door dimensions are 830x1950 mm.|
|INTERIOR DOOR||American wooden door with 80*200 dimensions.|
|EN 1063 BR6 NS Bulletproof . Weight 85 kg / m2. Glasses have bullet resistance certificate given by the international organizations accredited laboratory of TÜV Rheinland Company . Tough polycarbonate drawn based. Glass thickness is 40 mm . It can be manufactured in any size. The frame is made of special steel armor BR7 class which makes special frame .|
|EXTERIOR||External surfaces are painted with the desired color. Silicone-based exterior paint.|
|DOOR FRAME||Rapid primer single layer.|
|METAL PARTS||Rapid primer single layer.|
|ELECTRICAL INSTALLATION(Flush Mounted)|
|SYSTEM||Each room has a switch, a socket , a phone socket .Aditionally,spot lighting is used on the 4 corner of eaves.|
|INSTALLATIONS||Electric power 2000 W. 220 Volt power for sockets. 3x2,5 mm for lighting 2x1.5 mm TSE certificated NYM cables are used. All installation materials have TSE certificate .|
|OTHER||Cabin air ventilation and exterior lighting are included. Optionally, emergency siren sound also can be applied.|
|ACCESORIES||TSE certified materials are used.|
|PLUMBING||TSE certified materials are used.|
|WASTE WATER||TSE certified PVC materials are used.|
|The concrete foundation should be 20 cm wider than the cabin and the ground assembling of cabin, electricity, clean water and waste water connection are responsibiliry of the customer.|
|Cabin can be lifted from corner lugs by steel ropes.Cabin weight could vary according to the size.|
|LEVEL OF PROTECTION|
|9x19 124 gr FMJ||BR2 ( DN 1502 )||400 m/s|
|357 MAGNUM 158 gr||BR4 ( DN 1502 )||430 m/s|
|7.62X51 NATO Ball (G3)||BR6 ( DN 1502 )||830 m/s|
|7.62X51 WC (Tungsten C)||STANAG 4569 LVL-3||930 m/s|
|7.62X39 AP (AK-47)||STANAG 4569 LVL-2||725 m/s|
Karmod Prefabricated Building Technologies has the right to make modifications in the Technical Specifications.